Set-based Design Method for Multi-objective Structural Design with Conflicting Performances Under Topological Change

In car manufacturing, sustainable structural design with multiple conflicting objectives like weight reduction for less CO2 emission, strength and rigidity is essential. This research focuses on topological optimization method with which greater weight reduction is expected to be achieved. In view of the application of preference set-based design (PSD) method, topologically satisfied design is considered. We applied PSD method to the design of topological model. This study indicates the efficacy of PSD method to topological design problems including weight reduction aspect

Seasonal scatology of wolves along the Dempster Highway, northwestern Canada-an introduction of pollen analysis for dating old scats

This study aims to renovate the method of studying seasonal variation in wolf diet by introducing simultaneous analysis of undigested residua and pollen grains in wolf scats collected regardless of their freshness over a short period of time, in which pollen grains help to identify the season the diet was taken. The present study was conducted over a range of 500 km along the Dempster Highway extending north from Dawson, Yukon Territory to Inuvik, the Northwest Territories, Canada. We collected a total of 24 wolf scats along side roads and rivers, in which as many as 14 million pollen grains/scat were found on an average. The analysis revealed that the wolves relied exclusively on the caribou during winter when scats are free of pollen grains, but increase their dependence on the beaver and other mammals up to over 50% in term of residuum occurrence in spring and summer when scats are respectively loaded primarily with arboreal and herbaceous pollen grains. This result was consistent with the local fauna of prey animals, the migration pattern of the caribou for breeding and wintering, availability of the beaver and other rodents as dictated by ice/snow cover, and breeding and cub rearing pattern of the wolves themselves. Thus it was concluded that the pollen analysis serves as a powerful and effective tool for identifying the seasonality of old scats, and therefore saves a great deal of time and effort to be devoted to finding fresh scats

Forest cover classification using Landsat Thematic Mapper data for areal expansion of line LAI estimate generated through airborne laser profiler

A simple cover classification of Canadian boreal forest was conducted using Landsat Thematic Mapper (TM) imagery to expand a line estimate of leaf area index (LAI) into a two-dimensional regional one. The line estimate had been made through a 600km long continuous vegetation profile obtained by airborne laser altimetry. The present study area of 170×30km straddles the central portion of the laser profiling transect, from Wandering River north to Fort McMurray, Alberta, Canada. A total of eight land cover types were identified first in the field, and then some 83 training points and another 74 reference points were chosen and recorded for a supervised classification and its accuracy assessment respectively. By applying a supervised procedure to Landsat TM data in two different seasons, these eight cover types, consisting of six vegetated covers, i. e. closed and open conifer forests, conifer woodland, closed and open broad-leaved forests and marsh thicket, and two nonvegetated covers, i. e. bare ground and water surface, were classified. The classification was basically successful with an overall accuracy of 76%. Finally, using an overlay of this land cover map and the airborne laser profiling flight track, the mean LAI for each type of vegetation cover was obtained, and subsequently fed back to the land cover map to form a false-color map showing the two-dimensional distribution of LAI over the entire study area

Comparability of Weighed Dietary Records and a Self-Administered Diet History Questionnaire for Estimating Monetary Cost of Dietary Energy

An increasing number of studies have estimated monetary diet cost using various dietary assessment methods, based on databases on retail food prices, for investigating its association with dietary intake and health outcomes. However, information regarding the comparability of monetary diet cost across dietary assessment methods is absolutely lacking. This study compared monetary cost of dietary energy estimated from weighed dietary records (DRs) with that estimated from a self-administered diet history questionnaire (DHQ). The subjects were 92 Japanese women aged 31–69 years and 92 Japanese men aged 32–76 years. The DHQ (assessing diet during the preceding month) and 4-day DRs (one weekend day and three weekdays) were completed in each season over a 1-year period (DHQs1-4 and DRs1-4, respectively). An additional DHQ was completed at one year after completing DHQ1 (DHQ5). Monetary cost of dietary energy (Japanese yen/4184 kJ) was calculated using food intake information derived from each dietary assessment method, based on retail food prices. Pearson correlation between the mean of DRs1-4 and mean of DHQs1-4 was 0.64 for women and 0.69 for men. Pearson correlation between the mean of DRs1-4 and DHQ1 was 0.60 for women and 0.52 for men, while intraclass correlation between DHQ1 and DHQ5 was 0.64 for women and 0.51 for men. These data indicate reasonable comparability of monetary cost of dietary energy across DR and a DHQ as well as usefulness of a single administration of the DHQ for estimating monetary cost of dietary energy

Chemopreventive effects and anti-tumorigenic mechanisms of Actinidia arguta, known as sarunashi in Japan toward 4-(methylnitrosamino)-1-(3-pyridyl)-1-butanone (NNK)- induced lung tumorigenesis in a/J mouse

Background Previously, we reported the inhibitory effect of Actinidia arguta juice, known as sarunashi juice (sar-j) in Japan, on mutagenesis, inflammation, and mouse skin tumorigenesis. The components of A. arguta responsible for the anti-mutagenic effects were identified to be water-soluble, heat-labile phenolic compounds. We proposed isoquercetin (isoQ) as a candidate anticarcinogenic component. In this study, we sought to investigate the chemopreventive effects of A. arguta juice and isoQ on 4-(methylnitrosamino)-1-(3-pyridyl)-1-butanone (NNK)-induced lung tumorigenesis in A/J mice, and identify the possible mechanisms underlying the anti-tumorigenic effects of A. arguta. Results The number of tumor nodules per mouse lung in the group injected with NNK and administered A. arguta juice orally was significantly lower than that in the group injected with NNK only. Oral administration of isoQ also reduced the number of nodules in the mouse lungs. As expected, the mutagenicity of NNK and 1-methyl-3-nitro-1-nitrosoguanidine (MNNG) detected using S. typhimurium TA1535 decreased in the presence of sar-j. However, NNK and MNNG mutagenicity detected using S. typhimurium YG7108, a strain lacking the O6-methylguanine DNA methyltransferases (ogtST and adaST) did not decrease in the presence of sar-j suggesting that sar-j may mediate its antimutagenic effect by enhancing the DNA damage repair by ogtST and adaST. Phosphorylation of Akt, with or without epidermal growth factor stimulation, in A549 cells was significantly decreased following sar-j and isoQ treatment, indicating that components in sar-j including isoQ suppressed the PI3K/AKT signaling pathways. Conclusions Sar-j and isoQ reduced NNK-induced lung tumorigenesis. Sar-j targets both the initiation and growth/progression steps during carcinogenesis, specifically via anti-mutagenesis, stimulation of alkyl DNA adduct repair, and suppression of Akt-mediated growth signaling. IsoQ might contribute in part to the biological effects of sar-j via suppression of Akt phosphorylation, but it may not be the main active ingredient

Localization of Liv2 as an Immature Hepatocyte Marker in EB Outgrowth

The objective of this study was to establish Liv2, a surface marker of mouse immature hepatocytes (hepatoblasts), as a selection tool for embryonic stem (ES) cell–derived immature hepatocytes by acquiring basic data on Liv2 in normal mouse embryos and by confirming Liv2 expression in mouse ES-derived cells. The estimated molecular weight of Liv2 was 4045 kDa, and immunoreactivity was definitively detected in the cell membrane of fetal hepatocytes on embryonic day (E) 9.5, declined gradually until E12.5, and subsequently became undetectable. Liv2 was localized on and close to the cell membrane. Embryoid bodies (EB) were formed from mouse ES cells whose undifferentiated state was confirmed with immunostaining of Nanog by the hanging drop method. A few Liv2-positive cells occurred as a cluster in EB outgrowth on day 7, but only some of these were albumin (ALB)-positive on day 13. These cells had the same pattern of immunoreactivity, i.e., localization on the cell membrane, as immature hepatocytes in the developing liver, although there were other types of cells with a different pattern of immunoreactivity that were seen only as a granular pattern in the cytoplasm and without ALB or the neuronal marker nestin. These results suggest that Liv2 may be useful as a surface marker for immature hepatocytes derived from ES cells. This application would allow for the sole selection of immature hepatocytes and provide a useful tool for regenerative medicine

Performance evaluation of a preclinical SPECT scanner with a collimator designed for medium-sized animals

BACKGROUND: Equipped with two stationary detectors, a large bore collimator for medium-sized animals has been recently introduced for dedicated preclinical single-photon emission computed tomography (SPECT) imaging. We aimed to evaluate the basic performance of the system using phantoms and healthy rabbits. METHODS: A general-purpose medium-sized animal (GP-MSA) collimator with 135 mm bore diameter and thirty-three holes of 2.5 mm diameter was installed on an ultrahigh-resolution scanner equipped with two large stationary detectors (U-SPECT5-E/CT). The sensitivity and uniformity were investigated using a point source and a cylinder phantom containing (99m)Tc-pertechnetate, respectively. Uniformity (in %) was derived using volumes of interest (VOIs) on images of the cylinder phantom and calculated as [(maximum count − minimum count)/(maximum count + minimum count) × 100], with lower values of % indicating superior performance. The spatial resolution and contrast-to-noise ratios (CNRs) were evaluated with images of a hot-rod Derenzo phantom using different activity concentrations. Feasibility of in vivo SPECT imaging was finally confirmed by rabbit imaging with the most commonly used clinical myocardial perfusion SPECT agent [(99m)Tc]Tc-sestamibi (dynamic acquisition with a scan time of 5 min). RESULTS: In the performance evaluation, a sensitivity of 790 cps/MBq, a spatial resolution with the hot-rod phantom of 2.5 mm, and a uniformity of 39.2% were achieved. The CNRs of the rod size 2.5 mm were 1.37, 1.24, 1.20, and 0.85 for activity concentration of 29.2, 1.0, 0.5, and 0.1 MBq/mL, respectively. Dynamic SPECT imaging in rabbits allowed to visualize most of the thorax and to generate time-activity curves of the left myocardial wall and ventricular cavity. CONCLUSION: Preclinical U-SPECT5-E/CT equipped with a large bore collimator demonstrated adequate sensitivity and resolution for in vivo rabbit imaging. Along with its unique features of SPECT molecular functional imaging is a superior collimator technology that is applicable to medium-sized animal models and thus may promote translational research for diagnostic purposes and development of novel therapeutics

Total synthesis of TMG-chitotriomycin based on an automated electrochemical assembly of a disaccharide building block

The total synthesis of TMG-chitotriomycin using an automated electrochemical synthesizer for the assembly of carbohydrate building blocks is demonstrated. We have successfully prepared a precursor of TMG-chitotriomycin, which is a structurally-pure tetrasaccharide with typical protecting groups, through the methodology of automated electrochemical solution-phase synthesis developed by us. The synthesis of structurally well-defined TMG-chitotriomycin has been accomplished in 10-steps from a disaccharide building block